BS EN 10034-1993 Structural steel I and H sections - Tolerances on shape and dimensions
|
ID： |
B07B653AABE942B7B233FFDDBE8CA5C7 |
|
文件大小(MB)： |
0.2 |
|
页数： |
14 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10034:1993,Structural steel I and H,sections —,Tolerances on shape,and dimensions,The European Standard EN 10034:1993 has the status of a,British Standard,UDC 669.14.018.29-423.1:621.753.1,Licensed copy:PONTYPRIDD COLLEGE, 05/07/2007, Uncontrolled Copy, . BSI,BS EN 10034:1993,This British Standard, having,been prepared under the,direction of the Iron and Steel,Standards Policy Committee,was published under the,authority of the Standards,Board and comes,into effect on,15 December 1993,. BSI 12-1998,The following BSI references,relate to the work on this,standard:,Committee reference ISM/13,Draft for comment 91/38815 DC,ISBN 0 580 21968 2,Cooperating organizations,The European Committee for Standardization (CEN), under whose supervision,this European Standard was prepared, comprises the national standards,organizations of the following countries:,Austria Oesterreichisches Normungsinstitut,Belgium Institut belge de normalisation,Denmark Dansk Standardiseringsraad,Finland Suomen Standardisoimisliito, r.y.,France Association fran鏰ise de normalisation,Germany Deutsches Institut für Normung e.V.,Greece Hellenic Organization for Standardization,Iceland Technological Institute of Iceland,Ireland National Standards Authority of Ireland,Italy Ente Nazionale Italiano di Unificazione,Luxembourg Inspection du Travail et des Mines,Netherlands Nederlands Normalisatie-instituut,Norway Norges Standardiseringsforbund,Portugal Instituto Portuguès da Qualidade,Spain Asociación Espa駉la de Normalización y Certificación,Sweden Standardiseringskommissionen i Sverige,Switzerland Association suisse de normalisation,United Kingdom British Standards Institution,Amendments issued since publication,Amd. No. Date Comments,Licensed copy:PONTYPRIDD COLLEGE, 05/07/2007, Uncontrolled Copy, . BSI,BS EN 10034:1993,. BSI 12-1998 i,Contents,Page,Cooperating organizations Inside front cover,National foreword ii,Foreword 2,Text of EN 10034 3,National annex NA (informative) Committees responsible Inside back cover,National annex NB (informative) Cross-references Inside back cover,Licensed copy:PONTYPRIDD COLLEGE, 05/07/2007, Uncontrolled Copy, . BSI,BS EN 10034:1993,ii . BSI 12-1998,National foreword,This British Standard has been prepared under the direction of the Iron and Steel,Standards Policy Committee and is the English language version of,EN 10034:1993, Structural steel I and H sections — Tolerances on shape and,dimensions, published by the European Committee for Standardization (CEN).,This British Standard, together with BS 4-1:1993, published simultaneously with,this standard, supersedes BS 4-1:1980, which is withdrawn.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 8, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on,the inside front cover.,Licensed copy:PONTYPRIDD COLLEGE, 05/07/2007, Uncontrolled Copy, . BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10034,September 1993,UDC 669.14.018.29-423.1:621.753.1,Descriptors: Iron and steel products, I beams, structural steels, dimensional tolerances, form tolerances,English version,Structural steel I and H sections — Tolerances on shape,and dimensions,Poutrelles I et H en acier de construction —,Tolerances de formes et de dimensions,I- und H-Profile aus Baustahl —,Grenzabma遝 und Formtoleranzen,This European Standard was approved by CEN on 1993-08-30. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists in three official versions (English, French,German). A version in any other language made by translation under the,responsibility of a CEN member into its own language and notified to the,Central Secretariat has the same status as the official versions.,CEN members are the national standards bodies of Austria, Belgium,Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, ……
……